Slide down from above. Push the smooth printed pin. Drop in the keeper. No threaded or screw-in shelf attachment.
Physical fit and load capacity are unverified. Bench-test the coupon and complete assembly before wall use. No load rating, fastener suitability or structural certification. Do not use for heavy, overhead or safety-critical storage.
Specifications
One to three independent modules
A separate 120 mm rail for each module; no structural splices. Every size uses the same two guides, pin and keeper.
The controls edit the last module. Preview spacing is 15 mm between module envelopes; check real removal and pin-access space.
The printer selector's build volume is always in millimetres. Verify its usable dimensions before printing.
Designs save as local files, outside your dashboard collection. STL coordinates are millimetres and parts are already oriented for printing. The selected printer supplies build dimensions; Custom and Override build volume use the shared selector. Each piece is checked separately, so parts may be printed across multiple plates. No automatic plate packing or splitting is provided.
Assembly preview - top-down slide
Views show the path, not verified hand access. Remove in reverse: lift keeper, pull pin forwards, then lift the empty shelf at least 27 mm.
Loading geometry…
Assembly and physical validation gate
Interface v2: use a complete matching set. Every part and coupon has a recessed 2 identifier. Treat unmarked parts as v1 or unknown. Old parts may fit and appear locked; mixed sets remain unsupported. Do not mix old v1 rail/module/pin/keeper parts with these parts. The smooth 8 mm pin fits a nominal 9 mm bore; the 4 mm keeper fits a 5 mm bore (0.50 mm radial clearance). They push/drop in without turning or tightening. Printer/material fit still needs physical testing.
Print both coupon halves first. The fixed T guides have 0.40 mm lateral/depth clearance per side. Their top faces intentionally contact the receiver stops. Reject binding, looseness, cracked layers or unintended release; rework and re-test rather than scaling mounting dimensions.
Slice rails on their wall backs, bins/shelves upright, pins vertically on their flat heads, keepers upside down on their heads, and coupon receivers upright. Inspect and provide supports under receiver openings and shelf overhangs where your slicer needs them. Remove supports without damaging mating faces or holes.
On a bench, slide the module down over both guide heads until its stops seat. From inside the empty bin or above the shelf, feed the cross-pin rearwards through the central receiver boss and rail lug. Drop the keeper from above through the rail lug and the aligned pin cross-hole until its head seats on the lug. The head and keeper block pin withdrawal; the cross-pin blocks module lift-off. Inspect keeper seating before every use.
For removal, empty and support the module, lift out the keeper, pull the pin forwards into the module, then lift the module at least 27 mm to clear the guides. Maintain access inside the module and above the central lug. Never rely on friction alone.
Inspect mesh slicing, dimensions, wall and layer integrity, seating, pin/keeper clearance and repeated removal. Test accidental lifts, lateral pin movement, tilt, wear and gradual deformation on a restrained bench assembly. The keeper is gravity-seated and has no detent; vibration or inversion can release it, so these conditions require a redesigned lock and fresh validation.
The shelf lock is screw-free; anchoring the rail to a building is separate. Before any wall use, obtain a competent assessment of the wall substrate, anchors/fasteners, printed material/process, intended contents and long-term creep. Rail holes are nominal 4.5 mm plain clearance holes, without countersinks; they do not specify suitable screws or anchors. This prototype does not provide a hardware-free wall mounting method. Physically validate mounting, pull-out and sustained loading in a controlled setup with a catch barrier. No numerical or mesh test establishes safe load capacity.
Readiness: experimental, bench validation pending. No automatic promotion to wall-ready status is provided.